LOAD RANGE / PLY RATING IDENTIFICATION

The load range/ply rating branded on a tire’s sidewall identifies how much load the tire is designed to carry at its industry specified pressure. Passenger tires feature named load ranges while light truck tires use load ranges that ascend in alphabetical order (letters further along in the alphabet identify stronger tires that can withstand higher inflation pressures and carry heavier loads). Before load ranges were adopted, ply ratings and/or the actual number of casing plies were used to identify the relative strength with higher numeric ratings or plies identifying tires featuring stronger, heavier duty constructions.

Today’s load range/ply ratings do not count the actual number of body ply layers used to make up the tire’s internal structure, but indicate an equivalent strength compared to early bias ply tires. Most radial passenger tires have one or two body plies, and light truck tires, even those with heavy-duty ratings (10-, 12- or 14-ply rated), actually have only two or three fabric plies, or one steel body ply.

In all cases, when changing tire sizes or converting from one type of size to another, it is important to confirm that the Load Index in the tire’s service description of the new tire is equal to or greater than the Load Index of the original tire and/or that the new tire’s rated load capacity is sufficient to carry the vehicle’s gross axle weight ratings.

“The load range/ply rating branded on a tire’s sidewall identifies how much load the tire is designed to carry at its industry specified pressure.”

Passenger Tires

Since most P-metric passenger tires are manufactured in the standard load range, they will have nothing branded on their sidewalls or may be branded standard load and identified by an SL in their descriptions, as in P235/75R-15 SL.

Extra load P-metric tires will be branded extra load, and identified by an XL in their descriptions, as in P235/75R-15 XL.

Light load P-metric tires will be branded light load, and identified by an LL in their descriptions, as in P285/35R-19 LL.

Note: Only P-metric sized tires with 45-series aspect ratios or lower may be manufactured in a light load configuration. Light load tires are designed to carry less weight than standard load tires and have been developed for specific applications “typically when relatively large tire sizes are used as Original Equipment (O.E.) on relatively small cars or for Track & Competition DOT tires used for racing applications”.

Standard Euro-metric tires will have nothing branded on their sidewalls, while extra load/reinforced Euro-metric tires will be branded as such and identified by an XL or RF in their descriptions, as in 305/50R20 XL or 305/50R20 RF.

Light Truck Tires

Since light truck tires are often available in multiple load ranges, the appropriate load range is identified immediately following the size’s rim diameter in Tire Rack’s descriptions.

LT-metric, LT-flotation and LT-numeric tires are branded with their load range (load range E or LRE) or their ply rating (10 ply rated) on their sidewalls and list their appropriate load range letter in their descriptions as LT245/75R-16 E, 7.50R-15 D or 31×10.50R-15 C. LT-sized tires featuring section widths of 305mm/12.50″ or wider have their maximum loads and cold tire pressures rated at reduced maximum load pressures.

Euro-metric commercial vehicle/van tire dimensions end in a C (signifying commercial), such as 225/75R16C. Differences in load capacities and maximum pressure are identified by their load index and the maximum load/pressure for single/dual applications branded on their sidewall. The example provided above is for single/dual applications of a 225/75R16C size tire.

Special Trailer Service Tires

Special trailer service tires are often available in multiple load ranges. The appropriate load range is identified immediately following the size’s rim diameter in Tire Rack’s descriptions.

ST-metric sized special trailer service tires will be branded with their load range (load range D or LRD) on their sidewalls and list their appropriate load range letter in their descriptions as ST205/75R15 LRD.